Marbelite™
High Strength Polymer
Cement Coating

DecorChips™
Vinyl Chip Seamless
Flooring System

StyroCrete™
High Strength Polymer
Cement Coating for
Polystyrene (EPS) Foam

Feature Products

Other Products

Photo Tour

Training Program

FAQ's

The Company

Contact Us
Home  |  Products  |  Company Info   |  FAQ  |  Contact Us   

 

StyroCrete™ - StyroCrete is a specially formulated, high strenth cement and polymer mix designed to be used as a hard coating over expanded polystyrene foam (EPS) architectural design shapes and building trim. Typical applications include interior and exterior retrofit architectural and building components (i.e. crown moldings, columns, bandings, cornices, balusters, bannisters, window arches, and door trim), signage, theater stage props, movie props, trade show displays, landscape molds, foam letters, etc.

StyroCrete™ is a high strength polymer cement mix designed to be used with StyroCrete Polymer Concentrate as a coating over polystyrene (EPS) foam trim molding, letters or panels, either interior or exterior. It will increase the integrity and add strength and durability to the surface of amy Styrofoam shape. It may be integrally colored using the Marbelite Tint Kit or may be painted after complete drying.

Features

  • Hard textured surface
  • Hand trowel or hopper gun spray
  • Tinted or paintable
  • Use with mesh or without
  • Exterior or interior use
  • Hard in several hours
  • Spray will conform to any shape
  • Will not run or sag when correctly applied
  • Excellent hardness over its 30 day cure time
  • Can be sprayed rough "sand finish" or simulate a "coral stone" look
  • No screeding necessary

Additional Applications:

  1. Spray on walls for a varitey of textures such as knock down and bubble coat
  2. Trowel on walls for a stucco finish
  3. Spray "Knock Down" skip trowel for concrete pool decks and patios
  4. Hand crafted artificial landscape rocks and waterfeatures, such as (www.thefauxfactory.com)
  5. Restore existing precast architectural forms and structures

 

To Apply:

StyroCrete can be easily applied with either an undercoating gun (pressurized or siphon fed) or using a drywall texturing hopper gun for interior or exterior surface applications. StyroCrete will bond directly to polystyrene (EPS) foam shapes and architectural components which have been generally produced using hot wire EPS foam cutters. While we do not sell hot wire foam cutting equipment ourselves, we recommend those from Croma Aixia. and Hotwire Direct.

.

Marbelite International Corp.
1500 Global Court, Sarasota, FL. 34240
(941) 378-0860 or Toll Free (800) 348-3993
FAX (941) 378-9832
Website: www.marbelite.com
Email: marbelite@aol.com

Search Engine Optimization ( SEO ) by SecondEffort™

 

 

 

 

 

 

 

 

 


Other resources

cable management / satellite signal / cable organizer / sarasota condo rental / heavy equipment / florida awnings /camping chair
used laptops / gift ideas / florida paver bricks / online pharmacy