High Strength Polymer
Cement Coating

Vinyl Chip Seamless
Flooring System

High Strength Polymer
Cement Coating for
Polystyrene (EPS) Foam

Feature Products

Other Products

Photo Tour

Training Program


The Company

Contact Us

Home  |  Products  |  Company Info  FAQ Contact Us   


Marbelite™-The Ultimate Cement Coating System

Marbelite is a high strength polymer cement coating designed for surfacing old or new concrete. Marbelite transforms ordinary plain concrete into a beautiful practical surface of natural stone, slate, brick, tile or paver look. Marbelite surface materials offer higher strength properties than conventional concrete and are more flexible and durable. The Marbelite surface incorporates the use of durable Marbelite Polymer Bonding Resin and is then sealed with high grade polyurethane and acrylic sealers (Stain Seal "500" or Crystal Clear "1000") to provide high abrasion resistance as well as cleanability. Marbelite cement coatings offer an attractive and durable surface finish at an affordable cost, making it the perfect choice for commercial and residential installations, interior and exterior.

The Marbelite™ Advantage

Marbelite offers the following advantages over stamped concrete or interlocking paver systems:

  1. Marbelite can be applied over existing concrete at a 1/8" layer which permits existing elevations to remain basically unchanged, making it ideal for any type of concrete or poly-pebble (epoxy-aggregate) surfacing removal and renovation.
  2. The Marbelite pattern surface is uniform and even, with no crevices in which high-heel style shoes may get caught.
  3. Marbelite is a solid sealed surface, unlike pavers which permits ants, weeds and dirt to collect in the joint areas.
  4. Marbelite offers a variety of large sized patterns which are virtually unavailable in stamped concrete of interlocking paver systems.


High Strength Uniformity

Marbelite Polymer Cement Coatings are uniform in color and resistant to yellowing or discoloration due to exposre to ultraviolet light . The internam polymer matrix of Marbelite Polymer Cement provides excellent water resisitance to decrease spalling, cracking, and surface degradation caused by repeated freeze/thaw cycles, making it ideal for installation in cold climates. Marbelite mortars are also resistant to industrial chemicals.


Technical Support

At Marbelite International you'll benefit from a combination of research and experience in the cement coatings industry spanning over 30 years. Headquarters are located in Sarasota, Florida, and products are distributed throughout the United States, Canada and the Caribbean. The technical staff at Marbelite International Corporation is always available for consultation and problem solving techniques.


Marbelite International Corp.
1500 Global Court, Sarasota, FL. 34240

(941) 378-0860 or Toll Free (800) 348-3993
FAX (941) 378-9832










Other resources

cable management / satellite signal / cable organizer / sarasota condo rental / heavy equipment / florida awnings /camping chair
used laptops / gift ideas / florida paver bricks / online pharmacy